Product Selection_1-Durst Electric

DST-PDU Series Rack Power Distribution Units

Rack Power Distribution Unit PDU

DST-PDU rack power distribution unit is a general-purpose cabinet power distribution server developed for various monitoring occasions. It is widely used in computer room monitoring in various industries and is adopted by most system integrators, automation companies and research institutes. It is a stable and reliable networked cabinet power distribution equipment with extremely high character ratio. The power socket hole module with standard standards from all over the world can meet the different needs of customers in many countries, multi-use output jacks and IEC output sockets, and is suitable for plugs of imported instruments and equipment in many countries. The 19-inch standardized design is very easy to install. A minimum of 2 screws are required to secure the PDU. PDU products can be adjusted to 180 degrees for installation according to user needs. Equipped with a special L-shaped bending plate, PDU products can also be adjusted to 90 degrees for installation.

DST-11400 series intelligent temperature and humidity monitor

Electrical cabinet environment monitor

This product is mainly used for power equipment (such as outdoor terminal box, high and low voltage control cabinet, photovoltaic communication cabinet, handcart switch cabinet, ring network switch cabinet, underground substation, box-type substation, circuit breaker mechanism box, instrument box, etc.) and other occasions that require automatic moisture removal, condensation prevention and antifreeze. It can effectively prevent all kinds of accidents caused by humidity, condensation and high temperature (low), and ensure the efficient and safe operation of automatic operation. The product has the advantages of small size, long life, three anti-treatment (moisture, salt spray, mold), convenient installation, simple operation, etc. It is a humidity and temperature monitoring product all the way, which can monitor the temperature and humidity of the environment in real time, automatically control the corresponding load, ensure that the temperature and humidity indicators meet the working standards, and effectively prevent condensation. When the sensor fails, the product automatically cuts off the load power supply to ensure that other equipment is not affected. In addition, the product has a forced start load function.

DST-11401 series intelligent temperature and humidity monitor

Electrical cabinet environment monitor

This product is mainly used for power equipment (such as outdoor terminal box, high and low voltage control cabinet, photovoltaic communication cabinet, handcart switch cabinet, ring network switch cabinet, underground substation, box-type substation, circuit breaker mechanism box, instrument box, etc.) and other occasions that require automatic moisture removal, condensation prevention and antifreeze. It can effectively prevent all kinds of accidents caused by humidity, condensation and high temperature (low), and ensure the efficient and safe operation of automatic operation. The product has the advantages of small size, long life, three anti-treatment (moisture, salt spray, mold), convenient installation, simple operation, etc. It is a humidity and temperature monitoring product all the way, which can monitor the temperature and humidity of the environment in real time, automatically control the corresponding load, ensure that the temperature and humidity indicators meet the working standards, and effectively prevent condensation. When the sensor fails, the product automatically cuts off the load power supply to ensure that other equipment is not affected. In addition, the product has a forced start load function.

DST-18600 series intelligent cooling type dehumidifier

Electrical cabinet environment monitor

This product adopts semiconductor refrigeration dehumidification method, and actively sucks the humid air in the confined space into the dehumidification air duct under the action of the fan. The water vapor in the air condenses into water after passing through the semiconductor refrigeration mechanism, and then discharges the cabinet through the water guide pipe, which can achieve good dehumidification effect. By reducing the water content in the air, the relative humidity and absolute humidity drop at the same time, almost no increase in temperature, no negative impact caused by temperature difference, fundamentally eliminate or reduce the occurrence of accidents, and will not accelerate the aging of components and cabinets in the cabinet due to high temperature. The intelligent dehumidification device changes the passive condensation prevention method to active condensation guidance, which effectively prevents potential safety hazards such as aging of equipment in the cabinet, reduction of insulation strength, breakdown of secondary terminals, material mildew and corrosion of steel structures, and ensures the safe operation of the power grid.

DST-11408-D1-G temperature and humidity smoke sensor

Electrical cabinet environment monitor

This product uses a first-line brand smoke gas sensor probe to measure the smoke concentration in the air, and has a high sensitivity to smoke in a wide concentration range. The temperature and humidity sensor probe SHT30 imported from Switzerland is adopted. The sensor adopts advanced MEMS technology and is upgraded on the basis of the original SHT20 sensor. The measurement accuracy has been greatly improved. Communication using imported 485 chip, and the 485 interface for multiple protection, can effectively suppress the industrial field of static electricity, surge, group pulse and other interference, in the industry leading level.

DST-13200 digital display DC power accumulator controller

Digital Display Electricity Accumulation Series

DST-13200 digital display DC power totaler controller adopts automatic chip packaging technology, which has strong anti-interference ability. In the product appearance and display convenient design of dual-screen LED digital display, display content is more abundant. It can be used in conjunction with various sensors and transmitters to realize the measurement and display of physical quantities such as temperature, pressure, liquid level, speed, force, etc. The output functions include: alarm control, analog transmission, 485/232 communication, etc. Compared with traditional digital display instruments, the factory default parameters are newly added, which is easier to operate and more widely applicable.

DST-13100 digital display single-phase AC power totaler controller

Digital Display Electricity Accumulation Series

The DST-13100 series digital display single-phase AC power accumulator controller can be externally connected with standard signals of voltage and current transformers or directly connected with AC signals of current 5A and voltage 500V, and can measure active power, three-phase active balanced power, reactive power, apparent power, power factor, power frequency cycle, active power, reactive power and total power through a special power metering chip, and each function is clearly subdivided in the model. The output function can be analog output, communication output and cumulative pulse output. It is equipped with RS232/485 communication interface, supports standard MODBUS RTU communication protocol, and can be networked to realize centralized data management. It can be equipped with under-voltage and overload event alarm functions.

DST-13300 digital display three-phase AC power totaler controller

Digital Display Electricity Accumulation Series

The DST-13300 series digital display three-phase AC power accumulator controller can be externally connected with standard signals of voltage and current transformers or directly connected with AC signals of current 5A and voltage 500V, and can be used for fixed-point processing by special DSP chip, high-speed and high-precision AD acquisition, and various connection modes can be selected, three-phase AC current, three-phase AC voltage, three-phase active power, three-phase reactive power, three-phase apparent power, three-phase power factor, power frequency cycle, harmonics, three-phase active energy, three-phase reactive energy and three-phase total energy can be measured simultaneously, and each function is clearly subdivided on the model. The output function can be analog output, communication output and cumulative pulse output. It is equipped with RS232/485 communication interface, supports standard MODBUS RTU communication protocol, and can be networked to realize centralized data management. It can be equipped with undervoltage and overload event alarm and fault event recording functions.

DST-12400 digital frequency speed control instrument

Digital display/timing, counting/frequency speed series

DST-12400 digital frequency speed controller adopts automatic chip packaging technology, which has strong anti-interference ability. Six LED digital display, wide display range. With a variety of output functions: upper and lower limit alarm control output, 4-20mA analog output, RS485/RS232 communication, etc., a variety of input methods, for a variety of speed measuring occasions. With button start, stop, clear function, and optional external button. Powerful, suitable for various occasions.