undefined
undefined
+
  • undefined
  • undefined

DST-11400 series intelligent temperature and humidity monitor

Classification:

Electrical cabinet environment monitor

This product is mainly used for power equipment (such as outdoor terminal box, high and low voltage control cabinet, photovoltaic communication cabinet, handcart switch cabinet, ring network switch cabinet, underground substation, box-type substation, circuit breaker mechanism box, instrument box, etc.) and other occasions that require automatic moisture removal, condensation prevention and antifreeze. It can effectively prevent all kinds of accidents caused by humidity, condensation and high temperature (low), and ensure the efficient and safe operation of automatic operation. The product has the advantages of small size, long life, three anti-treatment (moisture, salt spray, mold), convenient installation, simple operation, etc. It is a humidity and temperature monitoring product all the way, which can monitor the temperature and humidity of the environment in real time, automatically control the corresponding load, ensure that the temperature and humidity indicators meet the working standards, and effectively prevent condensation. When the sensor fails, the product automatically cuts off the load power supply to ensure that other equipment is not affected. In addition, the product has a forced start load function.

Product Consulting
Product Manual
Mall Purchase
  • Technical parameters
  • Structural outline drawing
  • Ordering Guide

  • Technical parameters

    Data Name Technical parameters
    Working power supply AC220V(± 10%) frequency 50/60Hz
    Conditions of use Working environment temperature -25 ℃ ~ +70 ℃, environment relative humidity ≤ 95% RH
    Accuracy Temperature: ± 2 ℃; Humidity: ± 5% RH
    response speed Typical value ≤ 5s
    Output Active contact output (normally open),AC220V 5A
    Load capacity 1 times the working voltage, rated power resistive load AC220V/5A
    Power consumption ≤ 5W
    Withstand voltage High voltage 1500V frequency 50Hz alternating current for 1 minute, no breakdown and arcing phenomenon (national standard 1000V)
    three defenses Moisture-proof, anti-salt spray, anti-mold damage
    Volume 48 × 48 × 78mm3
    Hole size 45 0.5 × 45 0.5mm2

  • Outline Data Drawing

    1

  • Ordering Guide

    DST-11400-G: Base type installation: Fix the 8-core base on the 35 mm guide rail or directly on the mounting plate through the mounting screw hole.

    DST-11400: Embedded installation: 45 0.5 × 45 0.5mm2 holes are opened on the installation panel, and the monitor is fixed on the panel through the installation bracket.