undefined
+
  • undefined

DST-18600 series intelligent cooling type dehumidifier

Classification:

Electrical cabinet environment monitor

This product adopts semiconductor refrigeration dehumidification method, and actively sucks the humid air in the confined space into the dehumidification air duct under the action of the fan. The water vapor in the air condenses into water after passing through the semiconductor refrigeration mechanism, and then discharges the cabinet through the water guide pipe, which can achieve good dehumidification effect. By reducing the water content in the air, the relative humidity and absolute humidity drop at the same time, almost no increase in temperature, no negative impact caused by temperature difference, fundamentally eliminate or reduce the occurrence of accidents, and will not accelerate the aging of components and cabinets in the cabinet due to high temperature. The intelligent dehumidification device changes the passive condensation prevention method to active condensation guidance, which effectively prevents potential safety hazards such as aging of equipment in the cabinet, reduction of insulation strength, breakdown of secondary terminals, material mildew and corrosion of steel structures, and ensures the safe operation of the power grid.

Product Consulting
Product Manual
Mall Purchase
  • Technical parameters
  • Structural outline drawing
  • Ordering Guide

  • Technical parameters

    Data Name Technical parameters Data Name Technical parameters
    Working power supply AC/DC 85~265V, 50Hz or DC48V dehumidification efficiency
    and dehumidification space    		 >300mL(30W)/0.8-1.0m3 
    >350mL(40W)/1.0-l.2m3
    >400mL(50W)/ 71.2-1.5m3
    >450mL (60W) /71.5-2.0m3
    (24h, 35°C , 85% RH)
    dehumidification power 30~60W Heating power 50~500w (external, power selectable)
    Humidity detection is also around 0%RH~99%RH Working temperature -25 °c ~ 85 °c
    Dynamic value after dehumidification 30% RH'99%RH (factory setting 69% RH) Temperature detection range -25 °c ~ 125 °c
    humidity return difference 2~20 (factory setting value 2) Load start value 1°C ~ 60°C (factory set value 5°C)
    Condensate sheet temperature bubble circumference -5 °c ~ 20 °c Humidity measurement accuracy ±3%RH
    Display mode 3-digit digital display Temperature measurement accuracy ± 1°C
    Net weight 0.8kg Aqueduct PU8*5 D8mm、L2m

  • Outline Data Drawing

    1

  • Ordering Guide

    Model dehumidification power Overall dimension Shell material Other functions
    DST-18030 30W 170mm*100mm*50mm
    (length * width * height)    		 ABS high temperature resistant flame retardant The belt F behind the model indicates split type: (Note: it does not mean that the default is integrated type) The belt T behind the model indicates that it has low temperature heating function (default);
    W at the back of the model indicates that it has high temperature cooling function;
    The day after the model indicates the fault alarm output function: (Note: T, W and H can only be selected from three)
    DST-18040 40W
    DST-18050 50W
    DST-18060 60W