undefined
undefined
undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

DST-811 Thin Voltage/Current Isolators

Classification:

Analog Input

DST-811 thin voltage/current isolator will be DC voltage or current signal through isolation transmission, converted into the required signal to other instruments. It can be used with the unit combination instrument and DCS, PLC and other systems to give field instruments signal isolation, signal conversion, signal distribution, signal processing, etc., so as to improve the anti-interference ability of the industrial production process automatic control system and ensure the stability and reliability of the system. This product variety is divided into one in and one out, one in and two out, two in and two out, and the input and output magnetic isolation.

Keywords: Isolator

• Single channel, dual channel This series of varieties have one in and one out, one in and two out, two in and two out, four in and four out. • DC voltage, current, thermal resistance, thermocouple input • Analog output for power distribution • The signal type and test range of some products can be programmed by the supporting PC software • Input/output/power magnetic isolation Transmission accuracy (20 ℃):0.1%FS • Short response time, thin thickness, low power consumption • Plug-in terminals for easy installation and maintenance • Standard 35mm DIN rail clip-on mount
Product Consulting
Product Manual
Mall Purchase
  • Technical parameters
  • Structural outline drawing
  • Ordering Guide
  • Input
    Input signal 4-20mA、0-20mA、0-5V、1-5V、0-10V
    Input impedance Current impedance ≤ 50Ω, voltage impedance ≥ 250KΩ
    Maximum input current/voltage ≤ 30mA/≤ 10.5V
    Current Isolator Output
    Output signal 4-20mA、0-20mA、0-5V、1-5V、0-10V
    Output load

    4-20mA, 0-20mA load resistance RL≤ 400 Ω;

    0-5V, 1-5V load resistance RL≥ 250KΩ,0-10V load resistance RL≥ 500KΩ
    Voltage Isolator Output
    Output signal 4-20mA、0-20mA、0-5V、1-5V、0-10V
    Output load 4-20mA, 0-20mA load resistance RL≤ 400 Ω;
    0-5V, 1-5V, 0-10V load resistance RL≥ 20KΩ
    Power
    Power DC20-32V
    Power consumption Single output power consumption: ≤ 1.5W; Dual output power consumption: ≤ 2.6W
    Other parameters
    Insulation resistance
    (between input/output/power)    		 ≥ 100MΩ (at 500VDC)
    Insulation strength
    (between input/output/power)    		 2000Vrms (1 min, no spark)
    Working temperature -10~50 ℃ (no condensation, no icing)
    Relative humidity 25%～85%RH
    save temperature -10~60 ℃ (no condensation, no icing)
    temperature drift 0.0075%FS/℃
    Installation method 35mm DIN rail mounting
    Mounting dimensions 13*108*121.2mm (width * height * depth)
    Transmission accuracy (20 ℃) 0.1%FS 
    Response time ≤ 2ms
    Weight About 130 grams
    Electromagnetic compatibility Comply with GB/T18268 industrial equipment application requirements (IEC 61326-1)
    Applicable field equipment Two-wire, three-wire transmitter, DC current source

     

  • 1

     

    1

  • 1

     

    For example:

    Input signal:PT100 thermal resistance, output signal: 4-20mA, one in and one out. Type selection: DST-81511-IS-14-0-D;

    Input signal:PT100 thermal resistance, output signal: 4-20mA, one in and two out. Type selection: DST-81512-IS-14-0/0-D;

    Input signal:PT100 thermal resistance, output signal: 4-20mA, one in and two out. Type selection: DST-81512-IS-14-0/0-D;

    Remarks:The current output and voltage output are not switchable and need to be completed by changing the hardware. Please indicate clearly when ordering.