undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

DST-MSW-12G Series

Classification:

Network Managed Industrial Ethernet Switch

DST-MSW-12G series gigabit network management rail type industrial Ethernet switches meet IEC61850-3 standards and support up to 12 hundred/gigabit ports (up to 4 optical ports or SFP slots). It has complete management functions, including QoS, VLAN, IGMP Snooping/GMRP, Port Trunking, SNMP V1/V2/V3, RSTP/STP, etc. The unique RingGo redundant ring network protocol, the network link switching and recovery time is less than 20ms, which improves the reliability of the network. Redundant power input, wide temperature design, strong anti-electromagnetic interference ability, can be widely used in industrial sites requiring high bandwidth.

Keywords: Isolator

Support 8 hundred/gigabit Ethernet interfaces and 4 optional hundred/gigabit LC/SC/ST/FC optical ports, providing users with flexible networking methods 10/100/1000M adaptive, full/half duplex, MDI/MDIX adaptive mode • Supports multiple redundancy protocols such as ERPS/PVTRING/MSTP/RSTP/STP • Support QoS, VLAN, IGMP Snooping and other management functions Support HTTPS/SSL,SSH, user classification, port isolation, IPSG,arp anti-attack and other security technologies Support CLI, Telnet, Web management methods and network management software based on SNMPv1/v2c/v3 • Power supply supports overload protection, reverse connection protection and redundancy protection • IP40 protection class, no fan heat dissipation • The use of industrial power design, a variety of power input options to meet the user flexible application • -40 ℃ ~ 75 ℃ working temperature, meet the industrial application scenarios • Default rail, optional wall mount
Product Consulting
Product Manual
Mall Purchase
  • Technical parameters
  • Structural outline drawing
  • Ordering Guide

  • Switch Parameters

    IEEE Standards
    IEEE 802.3 10BaseT Ethernet
    IEEE 802.3u 100BaseT(X) and 100BaseFX Fast Ethernet
    IEEE 802.3ab 1000BaseT(X) Ethernet
    IEEE 802.3z 1000BaseX Ethernet
    IEEE 802.3x Flow Control
    IEEE 802.3d Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN Tag (Virtual Local Area Network Tag)
    IEEE 802.3ad LACP (Link Aggregation Control Protocol)
    IEEE 802.1x User Authentication (user authentication)
    IEEE 802.1ab LLDP (Logical Link Discovery Protocol)
    Exchange characteristics
    MAC Address Table 8K
    priority queue 8
    Giant Frame 10240 bytes
    Processing method store and forward
    Switching delay time ＜10us
    Backboard bandwidth 20Gbps
    Packet Buffer 4.1Mbit
    Number of VLANs 4094
    IGMP Multicast Group 512
    Port speed limit Support
    Interface
    Number of RJ45 ports Up to 8 100/gigabit ports
    Hundred Mega Light Port Up to 4 100 megawatt optical ports, optional SC/ST/FC
    Transmission distance of 100 megabytes optical port Multi-mode 2km,
    Single mode 20km/40km/60km/120km optional
    Gigabit optical port Up to 4 gigabit optical ports
    Gigabit optical port transmission distance Multi-mode 0.5km/2km,
    Single mode 20km/40km/60km/120km optional
    LED indicator Power, electrical port, optical port, status
    Console control port RS-232,RJ45 Connector, 115200bps, 8, N, 1
    Power
    24V input 4-pin terminal, dual power supply;
    24VDC power support range of 18 ~ 48VDC
    220V input 4-pin terminal, single power supply;
    220V power support range of 85~264VAC/77 ~ 300VDC
    Power consumption Maximum 15W
    Power Protection Reverse connection protection, overload protection
    Alarm 3-pin terminal
    Software Features RFC 1215 Trap, RFC1213 MIB II,RFC 1157 SNMP MIB, RFC 1493 Bridge MIB,
    RFC 2674 VLANE, RFC 1643,RFC 1757, RSTP MIB, Private MIB, LLDP MIB.
    MIB
    Equipment Management Support SNMP v1, v2, v3
    Supports Web management, Telnet, and serial CLI configuration
    支持DHCP-client
    Support user login password protection
    Security Features Support ACL
    Supports port-based MAC filtering
    Support MAC address binding
    Support for port-based 802.1X authentication
    Support for RADIUS authentication
    Support system self-defense to prevent attacks such as DDOS
    VLAN Support port VLAN, IEEE 802.1Q Tag
    Maximum number of VLANs available: 64,VID range 1~4094
    Support management VLAN
    Port convergence Static LACP support
    Supports 2 aggregation groups with up to 4 ports per group
    network redundancy 支持STP(IEEE 802.1d)，RSTP(IEEE 802.1w)和 MSTP(IEEE 802.1s)
    Private ring network (self-healing time <10ms)
    QoS Supports absolute priority and relative priority scheduling
    4 priority queues
    Support scheduling based on 802.1p/DSCP queues, 8 queues per port
    Port Mirroring Supports port-based unidirectional and bidirectional traffic mirroring
    IGMP Multicast Supports IGMP Snooping V1/V2, supports up to 256 multicast groups
    Port Bandwidth Control Supports rate limiting of inbound and outbound packet traffic, with a minimum granularity of 64Kbps.
    broadcast storm suppression Support suppression of broadcast messages, multicast messages and unknown unicast messages
    Equipment maintenance Syslog support
    支持RMON（Remote Network Monitoring）
    Support for Ping detection
    Support for Link Layer Discovery Protocol LLDP(Link Layer Discovery Protocol)
    SNTP Support SNTP protocol
    Firmware Upgrade Support WEB page and serial TFTP upgrade
    Profile Support import and export of configuration files
    Certification
    EMI FCC Part 15. CISPR(EN55022) class A
    EMS EN 61000-4-2(ESD)Level 3
    EN 61000-4-3(RS)Level 3
    EN 61000-4-4 (OJ)Level 3.
    EN 61000-4-5(Surge)Level 3.
    EN 61000-4-6(CS)Level 3
    EN 61000-4-8
    Mechanical IEC60068-2-6 (vibration)
    IEC60068-2-27 (impact)
    IEC60068-2-32 (free fall)
    Environment Properties
    Working temperature -40~75° C
    Storage temperature -40~85° C
    Relative humidity 5 ~ 95% (no frost)
    Physical characteristics
    Shell IP40 metal enclosure
    Installation method Default rail mount, optional wall mount
    Dimensions 50(W) x 144 (H) x 125 (D) mm
    Warranty period
    MTBF 320000h
    Warranty Period 5 years

  • Dimensional drawing

     

    尺寸图

  • Configuration

    Model Product Description
    DST-MSW-8TX/4MP 100 megabyte network management type guide rail type, 8 100 megabyte ports, 4 100 megabyte SFP slots, 24V dual power supply
    DST-MSW-8TX/4SC 100 megabyte network management type guide rail type, 8 100 megabyte ports, 4 100 megabyte SC ports, single mode double fiber 20km, 24V double power supply
    DST-MSW-8TX/4GSC Gigabit network management type guide rail type, 8 100 megabit ports, 4 gigabit SC ports, single mode double fiber 20km, 24V double power supply
    DST-MSW-8TX/4GP Gigabit network management type rail type, 8 100 megabit ports, 4 gigabit SFP slots, 24V dual power supply
    DST-MSW-8GT/4GSC Gigabit network management type rail type, 8 gigabit ports, 4 gigabit SC ports, single mode double fiber 20km, 24V double power supply
    DST-MSW-8GT/4GP Gigabit network management rail type, 8 gigabit ports, 4 gigabit SFP slots, 24V dual power supply

     

    Switch Naming Rules 

    DST

    -

    X1

    -

    X2

    X3

    /

    X4

    X5

    -

    X6

     

     

    Detailed description of parameters

    DST

    Prefix

    Enterprise Feature Code

    X1

    Switch Classification

    SW: unmanaged switch; MSW: managed switch; MC: photoelectric converter

    X2

    Number of ports

     

     

     

    X3

     

     

    Port Identification

    TX: 100 megabytes; GT: Gigabit port; GB: Gigabit COMBO;
    MP: 100 Gigabit SFP slot; GP: Gigabit SFP slot; X: 10 Gigabit SFP slot;
    MC: Multimode 2km 100 M SC optical port; GMC: Multimode 2km Gigabit SC optical port;
    SC: single-mode double-fiber 20km 100 M SC optical port; SC40: single-mode double-fiber 40km 100 M SC optical port;
    GSC: single-mode dual-fiber 20km Gigabit SC optical port; GSC40: single-mode dual-fiber 40km Gigabit SC optical port;
    MT: Multimode 2km 100 M ST optical port; GMT: Multimode 2km Gigabit ST optical port;
    ST: single-mode double-fiber 20km 100 M ST optical port; ST40: single-mode double-fiber 40km 100 M ST optical port;
    GST: single-mode dual-fiber 20km Gigabit ST optical port; GST40: single-mode dual-fiber 40km Gigabit ST optical port;
    S3: single-mode single-fiber 1310 transmission, 1510 reception; S5: single-mode single-fiber 1510 transmission, 1310 reception;

    X4

    Number of ports

     

    X5

    Port Identification

    Refer to the X3 port identification for an example

    X6

    Installation method

    The default is rail type, R: rack type; 3R: three-layer rack type; RA: State Grid Class A standard rack type; P:POE function;

    Remarks

    Guide rail type default 24VDC dual power supply; Rack type and three-layer rack type default AC/DC110 ~ 220V single power supply; State Grid Class A default AC/DC110 ~ 220V dual power supply; With POE function default 48V single power supply;
    Under non-default conditions: AC/DC110 ~ 220V single power supply can be selected for some models of rail-type switches, and the suffix of the model needs to be added: -220V;

     

    Switch Example 

    1