undefined
undefined
undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

DST-606X-EX-38-a/b-V24 type frequency input detection terminal isolation barrier

Classification:

Frequency input

The isolation barrier at the DST-606X-EX-38-a/b-V24 frequency input detection end can provide 24V power supply to the hazardous area instrument, and the frequency signal generated by the hazardous area instrument is transmitted to the safety side output through the isolation barrier. The input has high anti-interference performance. The product requires independent power supply, input/output/power three isolation. This product can be used in frequency signal source and other equipment. According to GB/T 3836.1-2021 and GB/T 3836.4-2021, it has passed the inspection and obtained the ccc certificate. It is suitable for installation and use in safe areas and can be used together with intrapexy safety equipment in Zone 0, Zone 1 and Zone 2 of explosive gas hazardous places.

Keywords: Isolator

Product Consulting
Product Manual
Mall Purchase
  • Technical parameters
  • Structural outline drawing
  • Ordering Guide

  • Technical parameters

     

    Hazardous side
    Input signal Frequency signal (sine wave, square wave, triangle wave)
    input impedance ≥ 2M
    Amplitude range 0.2～9V
    Response time ≤ 1S
    Measurement range 1～10000Hz
    Resolution 0.1Hz
    Safety side
    Output signal type Analog output
    Output load characteristics Current output: RL≤ 500 Ω, voltage output: RL≥ 250KΩ
    Transmission delay ≤ 10μs, signal transmission rate ≤ 9.6kbps

     

    General technical parameters 

     

    Power
    Power DC24V ±10%
    Power consumption Power consumption: ≤ 2.5W
    Other parameters
    Insulation strength
    (Between Inthenine Safety End/Non-Inthenine Safety End)    		 1500Vrms (1 min, no spark)

    Working temperature
    Relative humidity

    		 -10~50 ℃ (no condensation, no icing)
    25%～85%RH
    save temperature -10~60 ℃ (no condensation, no icing)
    Installation method 35mm DIN rail mounting
    Mounting dimensions 17.5*111.4*121.2mm (width * height * depth)
    Transmission accuracy (20 ℃) 0.2%FS ± 1 word
    Weight About 130 grams
    Electromagnetic compatibility Comply with GB/T18268 industrial equipment application requirements (IEC 61326-1)
    Applicable field equipment Two-wire, three-wire transmitter, DC current source

  • Structural outline drawing

    结构外形图

    General Structure Exterior

     

    通用结构外型图

  •  

    1

     

    For example:

    Input signal: 0-5KHz, power distribution 12VDC, output signal: 4-20mA, one in and one out. Type selection: DST-60611-EX-38-0-V12(0-5KHz);

    Input signal: 0-5KHz, power distribution 12VDC, output signal: 4-20mA, one in and two out. Selection: DST-60612-EX-38-0/0-V12(0-5KHz);

    Remarks:The frequency range can be indicated on the back of the model number.